LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Lancer Evolution >> Repair and Diagnosis (Single Page) >> Transmission >> Manual Trans >> Manual Transaxle Overhaul - Evolution >> Input Shaft >> Disassembly And Assembly >> Assembly Service Points >> >> C << Snap Ring Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> C << Snap Ring Installation

  1. Instal the thickest snap ring that can be fitted in the snap ring groove of input shaft.
  2. Make sure that the ball bearing end play meets the standard value.
    1. Standard value: 0 - 0.12 mm (0 - 0.0047 inch)
Fig 1: Installing Snap Ring
G01869796Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals