LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Lancer Evolution >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Removal, Overhaul & Installation >> Torque Specifications >> Lancer
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications: Lancer

TORQUE SPECIFICATIONS (LANCER)

Applications Ft. Lbs. (N.m)
Center Exhaust Pipe Flange
Front Bolts 29-44 (39-59)
Rear Bolts 30-37 (40-50)
Crankshaft Pulley Bolts 131-137 (178-186)
EGR Solenoid Bolts (1)
EGR Valve Bolts 13-18 (18-25)
Engine Coolant Temperature Sensor 15-29 (21-39)
Engine Front Mounting Bracket
Bolt 49-74 (67-101)
Nut (2) 44-55 (60-74)
Engine Front Mount Bolts (2) 25-40 (34-54)
EVAP Canister Bolts/Nuts (1)
Exhaust Manifold-To-Engine Nuts 20-24 (27-33)
Exhaust Pipe-To-Exhaust Manifold Nuts 29-44 (39-59)
Exhaust Pipe-To-Front Catalytic Converter Nuts 36-51 (49-69)
Exhaust Pipe-To-Muffler Bolts 30-37 (40-50)
Fuel Rail Bolts 8-10 (11-13)
Fuel Tank
Bolts 14-21 (20-28)
Nuts 16-24 (22-33)
Generator Belt Tension Adjustment Bracket Bolt 15-18 (21-25)
Heated Oxygen Sensor 29-36 (39-49)
Intake Manifold Stay Bolts 21-25 (28-34)
Knock Sensor 15-18 (21-25)
ORVR Vent Valve Module Bolts (1)
Output Shaft Sensor Bolts (1)
Power Steering Oil Pressure Switch 19-22 (26-30)
Rear Bench Seat Back Bolt 13-19 (18-26)
Rear Split Seat Assembly Bolts 25-40 (34-54)
Rear Split Seat Side Assembly Bolts 13-19 (18-26)
Spark Plugs 14-22 (20-30)
Throttle Body Bolts 14 (20)
Vehicle Speed Sensor Bolts (1)
INCH Lbs. (N.m) 
Accelerator Cable Bolt 35-53 (4-6)
Camshaft Position Sensor Bolt 69-87 (7.8-9.8)
Crankshaft Position Sensor Bolts 69-104 (7.8-11.8)
Fast Idle Valve Bolt 21-39 (2.4-4.4)
Fuel Gauge Unit Nuts 18-27 (2-3)
Fuel Line-To-Fuel Rail Retaining Bolts 35-53 (4-6)
Fuel Pressure Regulator Bolts 62-97 (7-11)
Fuel Pump Module Mounting Nuts 18-27 (2-3)
Fuel Return Pipe Bolts 62-97 (7-11)
Fuel Tank Leveling Valve Nuts 18-27 (2-3)
Fuel Tank Differential Pressure Sensor Nut 27-30 (3.0-3.4)
Fuel Tank Differential Pressure Sensor Plate Nut 18-27 (2-3)
Fuel Tank Rollover Valve Nut 18-27 (2-3)
Idle Air Control Motor Bolts 18 (2)
Ignition Coil Bolts 71-106 (8-12)
Knock Sensor Harness Retaining Bolt 89-106 (10-12)
Lower Timing Belt Cover Bolts 71-106 (8-12)
Manifold Differential Pressure Sensor Bolt 35-53 (4-6)
Park/Neutral Position Switch (A/T) 89-106 (10-12)
Power Steering Pressure Hose Fitting 89-124 (10-14)
Throttle Body Bracket Bolts (3)
Throttle Body Cruise Control Lever Assembly Bolts 35-53 (4-6)
Throttle Position Sensor Bolts 13-22 (1.5-2.5)
Transaxle Control Cable Adjustment Nut (A/T) 89-124 (10-14)
Upper Timing Belt Cover Bolts 89-124 (10-14)
Volume Airflow Sensor-To-Air Cleaner Cover Retaining Nuts 69-87 (7.8-9.8)
(1) Information is not available from manufacturer.
(2) This bolt/nut should be initially tightened, and then fully tightened after placing vehicle horizontally and loading full weight of engine on vehicle body.
(3) Tighten M6 throttle body bracket bolts to 44 INCH lbs. (5 N.m). Tighten M8 throttle body bracket bolts to 61 INCH lbs. (6.9 N.m).