Radiator Cooling Fan Control Relay (Eclipse, Eclipse Spyder, Galant, Lancer, Lancer Evolution VIII & Outlander)
Check for continuity between specified terminals when connecting battery voltage to appropriate terminals. See FAN CONTROL RELAY CONTINUITY CHECK table.
FAN CONTROL RELAY CONTINUITY CHECK
| Battery Voltage | Terminal No. To Be Connected To Tester | Continuity Test Results | |
|---|---|---|---|
| Eclipse, Eclipse Spyder, Galant, Lancer & Lancer Evolution VIII | |||
| Not Supplied | 2 & 4 | Open Circuit | |
| Connect Terminal No. 3 To Battery (-) & Terminal No. 1 To Battery (+) | 2 & 4 | Less Than 2 Ohms | |
| Outlander | |||
| Not Supplied | 2 & 4 | Open Circuit | |
| Connect Terminal No. 1 To Battery (-) & Terminal No. 3 To Battery (+) | 2 & 4 | Less Than 2 Ohms | |