LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Lancer Evolution >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing >> Sensors & Switches >> Sensors >> Throttle Position (TP) Sensor (Lancer Evolution VIII)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Position (TP) Sensor (Lancer Evolution VIII)

  1. Disconnect TP sensor connector. Check resistance between TP sensor connector (component side) terminals No. 1 and 4. Resistance should be 3500-6500 ohms. If resistance is not as specified, replace TP sensor. See THROTTLE POSITION SENSOR in REMOVAL & INSTALLATION article. If resistance is as specified, go to next step.
  2. While slowly opening throttle valve, check resistance between TP sensor connector terminals No. 1 and 2. Resistance should change smoothly in proportion to opening angle of throttle valve. If resistance is not as specified, replace TP sensor. See THROTTLE POSITION SENSOR in REMOVAL & INSTALLATION article.
scientia non olet · About LEMON Manuals