Removal And Installation: Installation

WARNING: This page is about a different car, the 2003 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Set withdrawal shaft, washer and snap pin to withdrawal lever and release bearing.
Install the manual transmission in reverse order of removal.

Apply sealant as below

Fig 1: Setting Withdrawal Shaft, Washer And Snap Pin To Withdrawal Lever And Release Bearing
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Applying Sealant
Courtesy of NISSAN MOTOR CO., U.S.A.
Tighten bolt securing transmission.

Fig 3: Transmission Bolt Tightening Specification (1 Of 2)
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: Transmission Bolt Tightening Specification (2 Of 2)
Courtesy of NISSAN MOTOR CO., U.S.A.