DTC Confirmation Test
WARNING: This page is about a different car, the 2002 Nissan Maxima and 2002 Infiniti I35. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Before proceeding, ensure battery voltage is more than 10 volts at idle.
Turn ignition on. Select DATA MONITOR mode with scan tool. Turn ignition off, wait at least 10 seconds, then turn ignition on. Repeat 32 times. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE . If 1st trip DTC is not detected, system is okay at this time.