DTC Confirmation Procedure
WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
DTC: P0102
- Turn ignition switch ON.
- Select "DATA MONITOR" mode.
- Start engine and wait at least 5 seconds.
- If DTC is detected, see DIAGNOSTIC PROCEDURE .
DTC: P0103
- Turn ignition switch ON.
- Select "DATA MONITOR" mode.
- Wait at least 5 seconds.
- If DTC is detected, see DIAGNOSTIC PROCEDURE . If DTC is not detected, go to next step.
- Start engine and wait at least 5 seconds.
- If DTC is detected, see DIAGNOSTIC PROCEDURE .