Fastener Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Key interlock and shift lock mechanisms | |
| Key interlock cable attaching nut | 12 ± 2 N.m (107 ± 17 in-lb) |
| Shift lock cable attaching nut | 12 ± 2 N.m (107 ± 17 in-lb) |
| Transaxle assembly | |
| Automatic transmission fluid drain plug | 32 ± 2 N.m (24 ± 1 ft-lb) |
| Cover attaching bolt | 7.0 ± 1.0 N.m (62 ± 9 in-lb) |
| Center member attaching bolt | 69 ± 10 N.m (51 ± 7 ft-lb) |
| Drive plate bolt | 49 ± 3 N.m (36 ± 2 ft-lb) |
| Driveshaft connecting nut | 245 ± 29 N.m (181 ± 21 ft-lb) |
| Front roll stopper bracket retainer nut | 52 ± 7 N.m (39 ± 5 ft-lb) |
| Lower arm nut connecting nut | 108 ± 10 N.m (80 ± 7 ft-lb) |
| Starter motor attaching bolt | 30 ± 3 N.m (22 ± 2 ft-lb) |
| Tie rod end nut connecting bolt | 25 ± 5 N.m (19 ± 3 ft-lb) |
| Transaxle assembly upper part coupling bolt | 48 ± 6 N.m (36 ± 4 ft-lb) |
| Transaxle control cable connecting nut | 12 ± 2 N.m (107 ± 17 in-lb) |
| Transaxle mount bracket attaching nut | 49 ± 5 N.m (36 ± 4 ft-lb) |
| Transaxle mount stopper attaching nut | 81 ± 7 N.m (60 ± 5 ft-lb) |
| Transaxle control | |
| Bolt attaching nut | 12 ± 2 N.m (107 ± 17 in-lb) |
| Key inter lock cable attaching nut | 12 ± 2 N.m (107 ± 17 in-lb) |
| Lock cam pin attaching nut | 4.9 ± 1.0 N.m (44 ± 8 in-lb) |
| Park/Neutral position switch mounting bolt | 11 ± 1 N.m (96 ± 8 in-lb) |
| Shift knob attaching screw | 2.2 ± 0.2 N.m (20 ± 2 in-lb) |
| Selector lever assembly attaching bolt | 12 ± 2 N.m (102 ± 22 in-lb) |
| Shift lock cable attaching nut | 12 ± 2 N.m (107 ± 17 in-lb) |
| Transaxle control cable attaching bolt | 12 ± 2 N.m (107 ± 17 in-lb) |
| Transaxle control cable connecting nut | 12 ± 2 N.m (107 ± 17 in-lb) |