Fastener Tightening Specifications

ITEM	SPECIFICATION
Transaxle control
Gearshift cable and select cable assembly attaching bolt	12 ± 2 N.m (102 ± 22 in-lb)
Gearshift lever base bracket attaching bolt	12 ± 2 N.m (102 ± 22 in-lb)
Shift lever assembly
Gearshift select lever retainer nut	10 ± 1 N.m (84 ± 13 in-lb)
Gearshift lever retainer nut	14 ± 2 N.m (120 ± 22 in-lb)
Transfer assembly
Center member attaching bolt	69 ± 9 N.m (51 ± 7 ft-lb)
Crossmember bar attaching bolt	49 ± 10 N.m (37 ± 7 ft-lb)
Driveshaft connecting nut	226 ± 29 N.m (167 ± 21 ft-lb)
Front roll stopper bracket retainer nut	52 ± 7 N.m (39 ± 5 ft-lb)
Lower arm connecting nut	108 ± 10 N.m (80 ± 7 ft-lb)
Rear roll stopper bracket retainer nut	52 ± 7 N.m (39 ± 5 ft-lb)
Stabilizer link connecting nut	39 ± 5 N.m (29 ± 3 ft-lb)
Tie rod end connecting nut	25 ± 5 N.m (19 ± 3 ft-lb)
Transfer assembly part coupling bolt	69 ± 9 N.m (51 ± 7 ft-lb)
Transfer oil drain plug	32 ± 2 N.m (23 ± 2 ft-lb)
Transfer oil filler plug	32 ± 2 N.m (23 ± 2 ft-lb)
Transaxle assembly
Bell housing cover attaching bolt (transaxle side)	9.0 ± 1.0 N.m (80 ± 9 in-lb)
Bell housing cover attaching bolt (engine side)	26 ± 5 N.m (19 ± 4 ft-lb)
Clutch release cylinder and clutch oil pipe attaching bolt	18 ± 3 N.m (13 ± 2 ft-lb)
Rear roll mount bracket attaching bolt	70 ± 10 N.m (52 ± 7 ft-lb)
Shift cable and select cable assembly attaching bolt	18 ± 3 N.m (13 ± 2 ft-lb)
Transaxle assembly lower part coupling bolt	48 ± 5 N.m (36 ± 3 ft-lb)
Transaxle assembly upper part coupling bolt	48 ± 5 N.m (36 ± 3 ft-lb)
Transaxle mount bracket attaching nut	47 ± 7 N.m (35 ± 5 ft-lb)
Transaxle mount stopper attaching nut	82 ± 7 N.m (61 ± 5 ft-lb)
Transaxle oil drain plug	32 ± 2 N.m (23 ± 2 ft-lb)
Transaxle oil filler plug	32 ± 2 N.m (23 ± 2 ft-lb)