<< B >> Engine Assembly Support

< Engine lifter (special tool MZ203827) is used >
1. Set the special tools MB991453 and MZ203827 to the vehicle to support the engine assembly.
2. Set special tools MB991453 to hold the engine/transaxle assembly.
Fig 1: Supporting Engine Assembly With Special Tool
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
< Engine hanger (special tool MB991895) is used >
1. Set special tool MB991895 to the strut mounting nuts and the radiator support upper insulator mounting bolts, which are located in the engine compartment, as shown.
2. Set special tools MB991454 to hold the engine/transaxle assembly.
Fig 2: Setting Special Tool To Strut Mounting Bolt And For Holding Engine Transaxle Assembly
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
< Engine hanger (special tool MB991928) is used >
1. Assemble the engine hanger (special tool MB991928). Set following parts to the base hanger.
  - Slide bracket (HI)
  - Foot (standard) (MB991932)
  - Joint (90) (MB991930)
  Fig 3: Assembling Engine Hanger (Special Tool)
  Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
2. Set the engine hanger (special tool MB991928) to the strut mounting nuts and the radiator support upper insulator mounting bolts, which are located in the engine compartment, as shown.
  NOTE: Adjust the engine hanger balance by sliding the slide bracket (HI).
3. Set special tools MB991454 to hold the engine/transaxle assembly.
Fig 4: Setting Special Tool To Strut Mounting Bolt And For Holding Engine Transaxle Assembly
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.