>>B<< Shift Cable Connection (Shift Lever Side) Installation

1. Make sure that there is no excessive play at the shift cable end gearshift cable clip. If there is excessive play or the gearshift cable clip is disengaged from the shift cable end, check the clip opening gap. If the gap is more than 9.5 mm (0.37 inch), squeeze the gearshift cable clip until the relaxed gap reaches 5 to 8 mm (0.20 to 0.31 inch).
2. Engage the gearshift cable clip with the shift cable hook securely, and push the gearshift cable clip with your thumbs until it clicks in place.
3. Install the shift cable to the shift lever.

Fig 1: Identifying Shift Cable End Clip Opening Gap

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Engaging Clip With Shift Cable Hook

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.