LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Lancer Evolution >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle Overhaul - Evolution >> Output Shaft >> Disassembly And Assembly >> Assembly Service Points >> >> P << Snap Ring Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> P << Snap Ring Installation

  1. Install the slinkiest snap ring that can be fitted in the groove of output shaft.
  2. Make sure that the taper roller bearing end play meets the standard value.
    1. Standard value: 0 - 0.09 mm (0 - 0.0035 inch)
Fig 1: Identifying Taper Roller Bearing End Play
G01869842Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals