LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Lancer LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (On-Vehicle Service - Evolution) >> Engine Assembly >> Removal And Installation >> Removal Service Points >> << C >> Transaxle Assembly Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

<< C >> Transaxle Assembly Removal

WARNING: This page is about a different variant/trim than selected.
  1. Pre-tighten the 2 bolts on the car to assemble the radiator support upper insulator to set the special tools MZ203827, MB991895 or MB991928.
  2. Remove the transaxle assembly. (Refer to appropriate TRANSAXLE article.)
    Fig 1: Pre-Tightening 2 Bolts On Car To Assemble Radiator Support Upper Insulator
    G01852094Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals