LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Lancer LS >> Repair and Diagnosis >> Transmission >> Automatic Trans >> On-Vehicle Service - Except Evolution >> On-Vehicle Service >> Transaxle Control Cable Adjustment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transaxle Control Cable Adjustment

  1. Remove the battery and battery tray.
  2. Move the selector lever to the "N" position.
  3. Loosen the upper control lever adjusting nut.
    Fig 1: Loosening Upper Control Lever Adjusting Nut
    G01876052Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. Gently push the transaxle control cable in the direction of the arrow, and then tighten the adjusting nut.
    1. Tightening torque: 12+/-2 N.m (107+/-17 in-lb) 
  5. Check that the transaxle shifts to the correct range corresponding to the position of the selector lever, and that it functions correctly in that range.
  6. Install the battery and battery tray.
scientia non olet · About LEMON Manuals