LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Montero Limited >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering Gear Box Assembly >> Disassembly & Assembly >> Assembly Service Points >> >> C << Rack Assembly Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> C << Rack Assembly Installation

CAUTION: Do not plug the vent hole in the rack with grease.
  1. Apply a coating of multipurpose grease to the rack assembly teeth face.
    Fig 1: Applying Coating Of Multipurpose Grease To Rack Teeth Face
    G01885285Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Cover rack serrations with special tool MB991213.
  3. Apply GENUINE MITSUBISHI POWER STEERING FLUID to special tool MB991213.
    Fig 2: Applying Genuine Mitsubishi Power Steering Fluid To Special Tool
    G01885286Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    CAUTION: When inserting the rack, carefully push in while aligning the center of the oil seal and the tip of special tool MB991213 so that the oil seal retainer spring does not fall out.
  4. Align the center of the oil seal with the rack to prevent the retainer spring from slipping. Slowly insert the rack from power cylinder side.
scientia non olet · About LEMON Manuals