DTC Set Conditions

• More than 2 seconds have passed since the starting sequence was completed.
• Engine speed is more than 2000 RPM.
• Volumetric efficiency is more than 60 percent.

Judgement criteria is when TP sensor output voltage has continued to be 0.8 volt or less for 2 seconds.

• More than 2 seconds have passed since the starting sequence was completed.
• Engine speed is less than 3000 RPM.
• Volumetric efficiency is less than 30 percent.

Judgement criteria is when TP sensor output voltage has continued to be 4.6 volts or more for 2 seconds.