Inspection Procedure 2: Accelerator Pedal Operation Is Not Smooth (Over Acceleration): Diagnosis
- Check the accelerator pedal.
Q: Is the accelerator pedal loose?
YES : Tighten, then go to Step 4 .
NO: Go to Step 2.
- Check the accelerator cable wiring.
Q: Is the accelerator cable routing bent sharply?
YES : Repair, then go to Step 4 .
NO : Go to Step 3.
- Check the accelerator cable lubricant.
Q: Is the accelerator cable lubricated sufficiently?
YES : There is no action to be taken.
NO : Refill or replace the lubricant, then go to Step 4.
- Check symptom.
Q: Does the accelerator pedal work normally?
YES : This diagnosis is complete.
NO : Return to Step 1 .