INSPECTION PROCEDURE 2: When the Ignition Key is Turned to the "ON" Position (Engine Stopped), the TCL Indicator Light does not Illuminate.: Notes

Fig 1: TCL Warning Light And TCL Indicator Light Circuit

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

NOTE: CONNECTOR LOCK SWITCH

ON: The ABS-ECU connector A-02 is connected.

OFF: The ABS-ECU connector A-02 is disconnected.

Fig 2: Identifying Connector A-02

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 3: Identifying Connector C-94

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 4: Identifying Connector C-41 And 42

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 5: Identifying Connector C-108 And C-111

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.