INSPECTION PROCEDURE 5: Selector Lever cannot be Moved from "R" to "P" Position.: Diagnosis
- Check the connection of selector lever assembly and transaxle control cable.
Q: Is the connection of selector lever assembly and transaxle control cable in good condition?
YES : Go to Step 2.
NO : Repair the connection of selector lever assembly and transaxle control cable. Check that the selector lever can be moved from "R" position to "P" position.
- Check the fit of the lock cam.
Q: Is the lock cam installed correctly?
YES : Go to Step 3.
NO : Install the lock cam correctly. Refer to DISASSEMBLY AND ASSEMBLY . Check that the selector lever can be moved from "R" position to "P" position.
- Check the lock cam.
Q: Is the lock cam in good condition?
YES : Go to Step 4.
NO : Replace the lock cam. Refer to DISASSEMBLY AND ASSEMBLY . Check that the selector lever can be moved from "R" position to "P" position.
- Check the fit of the transaxle control cable.
Q: Is the transaxle control cable installed correctly?
YES : Go to Step 5.
NO : Install the transaxle control cable correctly. Refer to TRANSAXLE CONTROL . Check that the selector lever can be moved from "R" position to "P" position.
- Check the transaxle control cable.
Q: Is the transaxle control cable in good condition?
YES : Repair or replace the selector lever assembly. Refer to TRANSAXLE CONTROL and DISASSEMBLY AND ASSEMBLY . Check that the selector lever can be moved from "P" position to "R" position smoothly.
NO : Replace the transaxle control cable. Refer to TRANSAXLE CONTROL . Check that the selector lever can be moved from "R" position to "P" position.