Inspection Procedure 3: Accelerator Pedal Operation Not Smooth (Over Acceleration): Diagnosis

STEP 1. Check the accelerator pedal.
Q: Is the accelerator pedal loose?
1. YES : Tighten, then go to Step 4 .
2. NO : Go to Step 2.
STEP 2. Check the accelerator cable wiring.
Q: Is the accelerator cable routing bent sharply?
1. YES : Repair, then go to Step 4 .
2. NO : Go to Step 3.
STEP 3. Check the accelerator cable lubricant.
Q: Is the accelerator cable lubricated sufficiently?
1. YES : There is no action to be taken.
2. NO : Refill or replace the lubricant, then go to Step 4.
STEP 4. Check symptom.
Q: Does the accelerator pedal work normally?
1. YES : This diagnosis is complete.
2. NO : Go to Step 1 .