LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2004 >> Lancer Evolution RS >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Wheel Hubs >> Front Axle Hub Assembly & Drive Shafts - Evolution >> Drive Shaft Assembly >> Disassembly And Assembly >> Assembly Service Points >> >> B << Spider Assembly Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> B << Spider Assembly Installation

CAUTION:
  • The drive shaft joint use special grease. Do not mix old and new or different types of grease.
  • If the spider assembly has been cleaned, take special care to apply the specified grease.
  1. Apply the specified grease furnished in the repair kit to the spider assembly between the spider axle and the roller.
    1. Specified grease: Repair kit grease 
  2. Install the spider assembly to the shaft from the direction of the spline chamfered side.
    Fig 1: Installing Spline Chamfered Side
    G00984100Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals