LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2004 >> Lancer Evolution RS >> Repair and Diagnosis (Single Page) >> Steering >> Manual Steering >> Power Steering - Evolution >> Power Steering Gear Box And Linkage >> Disassembly And Assembly >> Assembly Service Points >> >> C << Rack Assembly Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> C << Rack Assembly Installation

CAUTION: Do not close the vent hole in the rack with grease.
  1. Apply a coating of multipurpose grease to the rack teeth face.
    Fig 1: Identifying Grease Application Areas Of Rack Teeth Face
    G01079018Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Cover rack serrations with special tool MB991214.
  3. Apply GENUINE MITSUBISHI POWER STEERING FLUID to special tool MB991214.
  4. Align the center of the oil seal with the rack to prevent the retainer spring from slipping. Slowly insert the rack from power cylinder side.
Fig 2: Applying Power Steering Fluid To Special Tool MB991214
G01079019Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals