LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2004 >> Lancer Evolution >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Air Bag Restraint Systems) >> Component Testing >> CLOCKSPRING Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

CLOCKSPRING Test

WARNING: This page is about a different car, the 2004 Mitsubishi Galant. However, it is still accessible from the selected car via links, so may be relevant.
  1. Visually inspect clockspring connectors, terminals, protective tubing and case for damage. Check for continuity between connector C-306, terminal No. 1 and horn contact connector. See Fig 1 .
  2. Install Electrical Probes (MB991222) into connector C-305 from harness side. See Fig 2 . Continuity should not exist between any of the connector terminals.
  3. Replace clockspring if damaged or if continuity is not as specified.
Fig 1: Checking Continuity Between Connector C-306 & Horn Contact
G99E29862Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 2: Checking Continuity Between Connector C-305 Terminals
G99I29866Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals