LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2004 >> Lancer Evolution >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Auto-Cruise Control System) >> Auto-Cruise Control System Diagnosis >> Auto-Cruise Control System Diagnostic Function >> How To Read And Erase Diagnostic Trouble Codes >> When Using A Auto-Cruise Control Indicator Light
April 5, 2026: LEMON Manuals is launched! Read the announcement.

When Using A Auto-Cruise Control Indicator Light

WARNING: This page is about a different car, the 2004 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to the "ON" position while holding the auto-cruise control switch in the "SET" position (down). Then, within one second, more the auto-cruise control switch up to the "RES" position.
    Fig 1: Identifying Auto-Cruise Control Switch "Set" Position & "Res" Position
    G03303034Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Read a diagnostic trouble code by observing the flash display pattern of the auto-cruise control indicator light in the combination meter.
scientia non olet · About LEMON Manuals