LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2004 >> Lancer Evolution >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Auto-Cruise Control System) >> Auto-Cruise Control System Diagnosis >> Symptom Procedures >> INSPECTION PROCEDURE 1: Communication with Scan Tool MB991958 is not Possible (Communication with the Auto-cruise Control-ECU Only is not Possible.) >> Technical Description (Comment)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Technical Description (Comment)

WARNING: This page is about a different car, the 2004 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.

The cause is probably a malfunction of the auto-cruise control-ECU power supply circuit or the auto-cruise control-ECU ground circuit.



The cause is probably a malfunction of the stoplight switch circuit.



The cause is probably a malfunction of the clutch pedal position switch circuit.



The cause is probably an open-circuit in the output signal circuit in "N" range.