Fastener Tightening Specifications
WARNING: This page is about a different car, the 2004 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| ITEM | SPECIFICATION |
|---|---|
| Engine control system | |
| Accelerator pedal bracket installation | 12 ± 2 N.m (100 ± 22 in-lb) |
| Bracket nut | 4.9 ± 1.0 N.m (44 ± 8 in-lb) |
| Auto-cruise control system | |
| Auto-cruise control-ECU installation nut | 4.9 ±1.0 N.m (44 ± 8 in-lb) |
| Emission control system <2.4L Engine> | |
| Center exhaust pipe bolt | 59 ± 10 N.m (44 ± 7 ft-lb) |
| EGR valve bolt | 19 ± 3 N.m (14 ± 2ft-lb) |
| Front exhaust pipe nut | 49 ± 10 N.m (37 ± 7 ft-lb) |
| Hanger bolt | 12 ± 2 N.m (107 ± 17 in-lb) |
| Heated oxygen sensor | 44 ± 5 N.m (33 ± 3 ft-lb) |
| Emission control system <3.0L Engine> | |
| Center exhaust pipe bolt | 59 ± 10 N.m (44 ± 7 ft-lb) |
| EGR valve bolt | 22 ± 4 N.m (16 ± 3 ft-lb) |
| Exhaust fitting stay (M8) | 12 ± 2 N.m (107 ± 17in-lb) |
| Exhaust fitting stay (M12) | 32 ± 7 N.m (24 ± 5 ft-lb) |
| Front exhaust pipe nut | 49 ± 9 N.m (37 ± 6 ft-lb) |
| Hanger bolt | 12 ± 2 N.m (107 ± 17 in-lb) |
| Heated oxygen sensor | 44 ± 5 N.m (33 ± 3 ft-lb) |
| Warm-up three-way catalytic converter nut | 35 ± 4 N.m (26 ± 3 ft-lb) |