LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2004 >> Lancer Evolution >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Steering) >> Power Steering Gear Box Assembly >> Disassembly And Assembly >> Assembly Service Points >> >>K<< Rack Support Cover/Jam Nut Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>>K<< Rack Support Cover/Jam Nut Installation

WARNING: This page is about a different car, the 2004 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position rack at its center.
  2. Apply 3M™ AAD Part number 8672, 8679, 8678, 8661, 8663 or equivalent to the threaded part of the rack support cover.
    3. Fig 1: Installing Rack Support Cover And Jam Nut Using Special Tool MB991204
    G03279423Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Use special tool MB991204 to tighten the rack support cover to 13 plus/minus 2 N-m (109 plus/minus 21 in-lb).
  4. Turn the rack support cover 10 degree angle counterclockwise.
  5. Use special tool MB991204 to hold the rack support cover, and then tighten the jam nut to 59 plus/minus 10 N-m (44 plus/minus 7 ft-lb).
scientia non olet · About LEMON Manuals