LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2004 >> Lancer Evolution >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Ignition Switch) >> On-Vehicle Service >> How To Register Encrypted Code >> Key Id Registration >> Registration of additional key(s) without using the scan tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Registration of additional key(s) without using the scan tool

WARNING: This page is about a different car, the 2004 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.

If the scan tool is not available, new key(s) can be registered by operating two keys which have been registered to the vehicle (A maximum of eight keys can be registered to one vehicle). Follow the procedure below to register new key(s) to the vehicle.

NOTE: The registered key is the key that allows you to start the engine.
  1. Turn "ON" the ignition switch by using the first registered key (key A), and wait for five seconds.
  2. Remove the first registered key (key A).
  3. Insert the second registered ignition key (key B), and turn it to the ON position.
scientia non olet · About LEMON Manuals