LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2004 >> Lancer Evolution >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Simplified Wiring System (SWS)) >> Symptom Chart >> < Function System >
April 5, 2026: LEMON Manuals is launched! Read the announcement.

< Function System >

WARNING: This page is about a different car, the 2004 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.
FUNCTION SYSTEM SYMPTOM

SYSTEM SYMPTOM INSPECTION PROCEDURE REFERENCE
Tone alarm General description concerning the tone alarm function - GENERAL DESCRIPTION CONCERNING TONE ALARM 
Ignition key reminder tone alarm function does not work normally. B-1 IGNITION KEY REMINDER TONE ALARM FUNCTION 
Light reminder tone alarm function does not work normally. B-2 LIGHT REMINDER TONE ALARM FUNCTION 
Seat belt tone alarm function does not work. < vehicles without keyless entry system > B-3 INSPECTION PROCEDURE B-3: TONE ALARM: SEAT BELT TONE ALARM FUNCTION DOES NOT WORK NORMALLY. < VEHICLES WITHOUT KEYLESS ENTRY SYSTEM > 
Seat belt tone alarm function does not work. < vehicles with keyless entry system > SEAT BELT TONE ALARM FUNCTION 
Central door locking system General description concerning central door locking system - GENERAL DESCRIPTION CONCERNING CENTRAL DOOR LOCKING SYSTEM 
Central door locking system does not work at all. C-1 CENTRAL DOOR LOCK POWER SUPPLY CIRCUIT 
Some doors do not lock or unlock. C-2 INSPECTION PROCEDURE C-2: CENTRAL DOOR LOCKING SYSTEM: SOME DOORS DO NOT LOCK OR UNLOCK 
All the doors do not lock or unlock with just the door lock switch operation. C-3 CENTRAL DOOR LOCK (DOOR LOCK SWITCH) CIRCUIT 
All the doors do not lock or unlock by rotating the door lock key cylinder. C-4 CENTRAL DOOR LOCK (DOOR LOCK KEY CYLINDER SWITCH) CIRCUIT 
All the doors do not lock or unlock with just the driver's inside lock knob operation. C-5 CENTRAL DOOR LOCK (DOOR LOCK ACTUATOR) CIRCUIT 
The ignition key reminder tone alarm function does not work normally. C-6 INSPECTION PROCEDURE C-6: CENTRAL DOOR LOCKING SYSTEM: FORGOTTEN KEY PREVENTION FUNCTION DOES NOT WORK NORMALLY .
Power windows General description concerning the power windows - GENERAL DESCRIPTION CONCERNING POWER WINDOWS 
Power windows do not work at all. D-1 POWER WINDOW RELAY CIRCUIT 
The power window timer does not work normally. D-2 POWER WINDOW TIMER FUNCTION CIRCUIT 
Only the power window (LH) does work by operating the power window main switch. D-3 POWER WINDOW (LH) CIRCUT 
Power window (RH) does not work by operating the passenger's power window sub-switch. D-4 INSPECTION PROCEDURE D-4: POWER WINDOW: ONLY POWER WINDOW (RH) DOES NOT WORK BY OPERATING POWER WINDOW SUB-SWITCH .
Power window (RH) does not work normally by operating the power window main switch. D-5 POWER WINDOW (RH) CIRCUIT 
Keyless entry system General description concerning the keyless entry system - GENERAL DESCRIPTION CONCERNING KEYLESS ENTRY SYSTEM 
Keyless entry system does not operate. E-1 INSPECTION PROCEDURE E-1: KEYLESS ENTRY SYSTEM: KEYLESS ENTRY SYSTEM DOES NOT OPERATE 
The dome light, the turn-signal lights and the horn do not operate through the answerback function. E-2 INSPECTION PROCEDURE E-2: KEYLESS ENTRY SYSTEM: THE DOME LIGHT, THE TURN-SIGNAL LIGHTS AND THE HORN DO NOT OPERATE THROUGH THE ANSWERBACK FUNCTION .
Encrypted code cannot be registered. E-3 ENCRYPTED TRANSMITTER CODE CIRCUIT 
Sunroof General description concerning the sunroof - GENERAL DESCRIPTION CONCERNING SUNROOF 
Sunroof does not operate. F-1 SUNROOF MOTOR ASSEMBLY POWER SUPPLY CIRCUIT 
Any of the sunroof switch positions is defective. F-2 INSPECTION PROCEDURE F-2: SUNROOF: ANY OF THE SUNROOF SWITCH POSITIONS IS DEFECTIVE .
Sunroof timer function does not work normally. F-3 INSPECTION PROCEDURE F-3: SUNROOF: SUNROOF TIMER FUNCTION DOES NOT WORK NORMALLY .
Safety mechanism does not function. F-4 INSPECTION PROCEDURE F-4: SUNROOF: SAFETY MECHANISM DOES NOT FUNCTION .
Windshield wiper and washer General description concerning the windshield wiper and washer - GENERAL DESCRIPTION CONCERNING WINDSHIELD WIPER AND WASHER 
Windshield wiper does no not work at all. G-1 WINDSHIELD WIPER MOTOR CIRCUIT 
The windshield wipers do not work when the windshield wiper switch is at "INT" or "MIST" position or the windshield washer switch is at "ON" position. However, the wipers work at low speed when the windshield wiper switch is at "LO" or "HI." G-2 INSPECTION PROCEDURE G-2: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD WIPERS DO NOT WORK WHEN THE WINDSHIELD WIPER SWITCH IS AT "INT" OR "MIST" POSITION OR THE WINDSHIELD WASHER SWITCH IS AT "ON" POSITION. HOWEVER, THE WIPERS WORK AT LOW SPEED WHEN THE WINDSHIELD WIPER SWITCH IS AT "LO" OR "HI." 
Any of the windshield wiper switch positions is defective. G-3 INSPECTION PROCEDURE G-3: WINDSHIELD WIPER AND WASHER: ANY OF THE WINDSHIELD WIPER SWITCH POSITIONS IS DEFECTIVE .
Windshield wiper does not stop at the predetermined park position. G-4 INSPECTION PROCEDURE G-4: WINDSHIELD WIPER AND WASHER: WINDSHIELD WIPER DOES NOT STOP AT THE PREDETERMINED PARK POSITION .
Windshield intermittent wiper interval can not be adjusted by means of windshield intermittent wiper interval adjusting knob. G-5 INSPECTION PROCEDURE G-5: WINDSHIELD WIPER AND WASHER: WINDSHIELD INTERMITTENT WIPER INTERVAL CAN NOT BE ADJUSTED BY MEANS OF WINDSHIELD INTERMITTENT WIPER INTERVAL ADJUSTING KNOB .
The intermittent wiper interval is not changed according to the vehicle speed. G-6 INSPECTION PROCEDURE G-6: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD INTERMITTENT WIPER INTERVAL IS NOT CHANGED ACCORDING TO THE VEHICLE SPEED .
The windshield washer does not work. G-7 INSPECTION PROCEDURE G-7: WINDSHIELD WIPER AND WASHER: WINDSHIELD WASHER DOES NOT WORK .
Rear wiper and washer General description concerning the rear wiper and washer - GENERAL CIRCUIT DIAGRAM FOR REAR WIPER AND WASHER (A/T) 
Rear wiper does not work at all. H-1 REAR WIPER MOTOR POWER SUPPLY CIRCUIT 
Rear wiper does not stop at the predetermined park position. H-2 INSPECTION PROCEDURE H-2: REAR WIPER AND WASHER: REAR WIPER DOES NOT STOP AT THE PREDETERMINED PARK POSITION .
When the selector lever is moved to "R" position during the rear wiper operation, the rear wiper does not operate at the continuous mode. H-3 INSPECTION PROCEDURE H-3: REAR WIPER AND WASHER: WHEN THE SELECTOR LEVER IS MOVED TO "R" POSITION DURING THE REAR WIPER OPERATION, THE REAR WIPER DOES NOT OPERATE AT THE CONTINUOUS MODE .
Rear washer does not operate. H-4 INSPECTION PROCEDURE H-4: REAR WIPER AND WASHER: REAR WASHER DOES NOT OPERATE .
Seatbelt warning light General description concerning the seatbelt warning - SEAT BELT WARNING LIGHT 
The seatbelt warning light does not work normally. < vehicles without keyless entry system > I-1 INSPECTION PROCEDURE I-1: Seat Belt Warning Light: Seat Belt Warning Light does not Work Normally. < Vehicles without Keyless Entry System > 
The seatbelt warning light does not work normally. < vehicles with keyless entry system > INSPECTION PROCEDURE I-1: SEAT BELT WARNING LIGHT: SEAT BELT WARNING LIGHT DOES NOT WORK NORMALLY. < VEHICLES WITH KEYLESS ENTRY SYSTEM > 
Headlight and taillight General description concerning the headlight and taillight - HEADLIGHT AND TAILLIGHT 
Taillights does not illuminate normally. J-1 INSPECTION PROCEDURE J-1: HEADLIGHT, TAIL LIGHT: TAIL LIGHTS DOES NOT ILLUMINATE NORMALLY .
Headlights (low-beam) do not illuminate normally. J-2 INSPECTION PROCEDURE J-2: HEADLIGHT, TAIL LIGHT: HEADLIGHTS (LOW-BEAM) DO NOT ILLUMINATE NORMALLY .
Headlights (high-beam) do not illuminate normally. J-3 INSPECTION PROCEDURE J-3: HEADLIGHT, TAIL LIGHT: HEADLIGHTS (HIGH-BEAM) DO NOT ILLUMINATE NORMALLY .
Headlights do not illuminate when the passing switch is operated. J-4 INSPECTION PROCEDURE J-4: HEADLIGHT, TAIL LIGHT: WHEN THE PASSING SWITCH IS TURNED "ON", THE HEADLIGHTS (LOW-BEAM OR HIGH-BEAM) DO NOT ILLUMINATE .
Headlights do not illuminate when the lighting switch is at "AUTO," "TAIL," and "PASSING" position, but illuminate at low-beam when the switch is at "HEAD" position. at this position, the headlights cannot be changed into high beam by operating the dimmer switch. J-5 INSPECTION PROCEDURE J-5: HEADLIGHT, TAIL LIGHT: HEADLIGHTS DO NOT ILLUMINATE WHEN THE LIGHTING SWITCH IS AT "AUTO," "TAIL," AND "PASSING" POSITION, BUT ILLUMINATE AT LOW-BEAM WHEN THE SWITCH IS AT "HEAD" POSITION. AT THIS POSITION, THE HEADLIGHTS CANNOT BE CHANGED INTO HIGH BEAM BY OPERATING THE DIMMER SWITCH .
Tail lights, the position lights, the side marker light or the license plate lights do not illuminate. J-6 INSPECTION PROCEDURE J-6: HEADLIGHT, TAIL LIGHT: TAIL LIGHTS, THE POSITION LIGHTS, THE SIDE MARKER LIGHT OR THE LICENSE PLATE LIGHTS DO NOT ILLUMINATE .
One of the headlights does not illuminate. J-7 INSPECTION PROCEDURE J-7: ONE OF THE HEADLIGHTS DOES NOT ILLUMINATE .
The high-beam indicator light does not illuminate. J-8 INSPECTION PROCEDURE J-8: THE HIGH-BEAM INDICATOR LIGHT DOES NOT ILLUMINATE .
Headlight automatic shutdown function does not work normally. J-9 INSPECTION PROCEDURE J-9: HEADLIGHT, TAIL LIGHT: HEADLIGHT AUTOMATIC SHUTDOWN FUNCTION DOES NOT WORK NORMALLY .
Headlight dimmer switch automatic resetting function does not work normally. J-10 INSPECTION PROCEDURE J-10: HEADLIGHT, TAIL LIGHT: HEADLIGHT DIMMER SWITCH AUTOMATIC RESETTING FUNCTION DOES NOT WORK NORMALLY .
Daytime running light function does not work normally. < Vehicles for CANADA> J-11 INSPECTION PROCEDURE J-11: HEADLIGHT AND TAILLIGHT: DAYTIME RUNNING LIGHT FUNCTION DOSE NOT WORK NORMALLY. < VEHICLES FOR CANADA > 
When the daytime running light function is operating, the headlights (low-beam) continue lighting in a reduced beam state even if the headlight switch turns on. < Vehicles for CANADA> J-12 INSPECTION PROCEDURE J-12: HEADLIGHT AND TAILLIGHT: WHEN THE DAYTIME RUNNING LIGHT FUNCTION IS OPERATING, THE HEADLIGHTS (LOW-BEAM) CONTINUE LIGHTING IN A REDUCED BEAM STATE EVEN IF THE HEADLIGHT SWITCH TURNS ON. < Vehicles for CANADA > 
When the ignition switch is turned from on to off, the headlights darken significantly. < Vehicles for CANADA> J-13 INSPECTION PROCEDURE J-13: HEADLIGHT AND TAILLIGHT: WHEN THE IGNITION SWITCH IS TURNED FROM ON TO OFF, THE HEADLIGHTS DARKEN SIGNIFICANTLY. < Vehicles for CANADA > 
Flasher timer General description concerning the flasher timer - FLASHER TIMER 
Turn-signal lights do not flash when the turn signal light switch is operated normally. K-1 INSPECTION PROCEDURE K-1: FLASHER TIMER: TURN-SIGNAL LIGHTS DOES NOT FLASH WHEN THE TURN-SIGNAL LIGHT SWITCH IS TURNED ON .
Hazard warning lights do not flash when the hazard warning light switch is turned on. K-2 INSPECTION PROCEDURE K-2: FLASHER TIMER: HAZARD WARNING LIGHTS DO NOT ILLUMINATE WHEN THE HAZARD WARNING LIGHT SWITCH IS TURNED ON .
The right or left turn-signal light does not illuminate. K-3 INSPECTION PROCEDURE K-3: FLASHER TIMER: THE RIGHT OR LEFT TURN-SIGNAL LIGHT DOES NOT ILLUMINATE .
Fog light General description concerning the foglights - FOG LIGHT 
Fog lights do not illuminate when the fog light switch is turned on. L-1 INSPECTION PROCEDURE L-1: FOG LIGHT: FOG LIGHTS DO NOT ILLUMINATE WHEN THE FOG LIGHT SWITCH IS TURNED ON .
The fog lights does not go out when the headlight switch is turned off. L-2 INSPECTION PROCEDURE L-2: FOG LIGHT: FOG LIGHTS DO NOT GO OUT WHEN THE HEADLIGHTS (LOW-BEAM) ARE TURNED OFF WHILE THE FOG LIGHTS ARE ON .
One of the fog lights does not illuminate. L-3 INSPECTION PROCEDURE L-3: FOG LIGHT: ONE OF THE FOG LIGHTS DOES NOT ILLUMINATE .
Interior light General description concerning the interior light - INTERIOR LIGHT 
Dome light, luggage compartment light < ECLIPCE >, trunk light < ECLIPSE SPYDER > and door-ajar indicator light does not illuminate or turn off normally does not illuminate or go out normally. M-1 INSPECTION PROCEDURE M-1: INTERIOR LIGHT: DOME LIGHT, LUGGAGE COMPARTMENT LIGHT < ECLIPSE >, TRUNK LIGHT < ECLIPSE SPYDER > AND DOOR-AJAR INDICATOR LIGHT DOES NOT ILLUMINATE OR TURN OFF NORMALLY .
The dome light or luggage compartment light do not illuminate or turn off normally. M-2 INSPECTION PROCEDURE M-2: INTERIOR LIGHT: THE DOME LIGHT, LUGGAGE COMPARTMENT LIGHT < ECLIPSE > OR TRUNK LIGHT < ECLIPSE SPYDER > DOES NOT ILLUMINATE OR GO OUT NORMALLY .
Dome light dimming function does not work normally. M-3 INSPECTION PROCEDURE M-3: DOME LIGHT: DOME LIGHT DIMMING FUNCTION DOES NOT WORK NORMALLY .
The interior light automatic shut down function does not operate correctly. M-4 INSPECTION PROCEDURE M-4: INTERIOR LIGHT: THE INTERIOR LIGHT AUTOMATIC SHUT DOWN FUNCTION DOES NOT OPERATE CORRECTLY .
Theft-alarm system General description concerning the theft-alarm system - THEFT-ALARM SYSTEM 
Theft-alarm system is not armed (theft-alarm indicator light does not illuminate). N-1 INSPECTION PROCEDURE N-1: THEFT-ALARM SYSTEM: THEFT-ALARM SYSTEM IS NOT ARMED (THEFT-ALARM INDICATOR LIGHT DOES NOT ILLUMINATE .
Horn does not sound when the theft-alarm is triggered. N-2 INSPECTION PROCEDURE N-2: THEFT-ALARM SYSTEM: HORN DOES NOT SOUND WHEN THE THEFT-ALARM IS TRIGGERED .
Headlights (high-beam) do not flash when the theft-alarm system is triggered. N-3 INSPECTION PROCEDURE N-3: THEFT-ALARM SYSTEM: HEADLIGHTS (HIGH-BEAM) DO NOT FLASH WHEN THE THEFT-ALARM SYSTEM IS TRIGGERED .
Panic alarm function does not work. N-4 INSPECTION PROCEDURE N-3: THEFT-ALARM SYSTEM: HEADLIGHTS (HIGH-BEAM) DO NOT FLASH WHEN THE THEFT-ALARM SYSTEM IS TRIGGERED .
scientia non olet · About LEMON Manuals