Assembly Service Points

WARNING: This page is about a different car, the 2004 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: By inserting a wire, the brush will be secured in place, and the installation of the rotor will be easier.

A) Regulator Assembly Installation - After installing the regulator assembly, insert a wire through the hold provided on the rear bracket while pressing down on the brush, and secure the brush. See Fig 1 .
B) Rotor Assembly Installation - After installing the rotor, remove the wire used to secure the brush.

Fig 1: Installing Regulator Assembly

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.