Starter Specifications
WARNING: This page is about a different variant/trim than selected.
STARTER SPECIFICATIONS
| Application | In. (mm) | ||
|---|---|---|---|
| Armature | |||
| Commutator Deflection | |||
| Standard | .001" (0.5 mm) | ||
| Limit | .004" (.1 mm) | ||
| Commutator Diameter | |||
| Standard | 1.16" (29.4 mm) | ||
| Limit | 1.13" (28.8 mm) | ||
| Commutator Undercut (Mica) Depth | |||
| Standard | .20" (.5 mm) | ||
| Limit | 0.08" (.2 mm) | ||
| Brush Length | .28" (7.0 mm) | ||
| Pinion Gap | 0.2-0.7" (.5-2.0 mm) | ||