LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2004 >> Lancer LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 59 (Simplified Wiring System (SWS) - Evolution) >> SWS Diagnosis >> Symptom Chart >> Function System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Function System

WARNING: This page is about a different variant/trim than selected.
FUNCTION SYSTEM CHART

SYSTEM SYMPTOM INSPECTION PROCEDURE REFERENCE
Tone alarm General description concerning the tone alarm. - GENERAL DESCRIPTION CONCERNING TONE ALARM 
Ignition key reminder tone alarm function does not work normally. B-1 INSPECTION PROCEDURE B-1: TONE ALARM: IGNITION KEY REMINDER TONE ALARM FUNCTION DOES NOT WORK NORMALLY 
Light reminder tone alarm function does not work normally. B-2 INSPECTION PROCEDURE B-2: TONE ALARM: LIGHT REMINDER TONE ALARM FUNCTION DOES NOT WORK ) NORMALLY 
Seat belt tone alarm function does not work normally. B-3 INSPECTION PROCEDURE B-3: TONE ALARM: SEAT BELT TONE ALARM FUNCTION DOES NOT WORK NORMALLY 
Central door locking system General description concerning the central door locking system. --- GENERAL DESCRIPTION CONCERNING THE CENTRAL DOOR LOCKING SYSTEM 
The central door lock system does not work at all. C-1 INSPECTION PROCEDURE C-1: CENTRAL DOOR LOCKING SYSTEM: THE CENTRAL DOOR LOCK SYSTEM DOES NOT WORK AT ALL 
Some doors do not lock or unlock. C-2 INSPECTION PROCEDURE C-2: CENTRAL DOOR LOCKING SYSTEM: SOME DOORS DO NOT LOCK OR UNLOCK 
All the doors do not lock or unlock with just the door lock switch operation. C-3 INSPECTION PROCEDURE C-3: CENTRAL DOOR LOCKING SYSTEM: ALL THE DOORS DO NOT LOCK OR UNLOCK WITH JUST THE DOOR LOCK SWITCH OPERATION 
All the doors do not lock or unlock with just the door lock key cylinder key operation. C-4 INSPECTION PROCEDURE C-4: CENTRAL DOOR LOCKING SYSTEM: ALL THE DOORS DO NOT LOCK OR UNLOCK WITH JUST THE DOOR LOCK KEY CYLINDER KEY OPERATION 
Power windows General description concerning the power windows. --- GENERAL DESCRIPTION CONCERNING THE POWER WINDOWS 
Power windows do not work at all. D-1 INSPECTION PROCEDURE D-1: POWER WINDOWS: POWER WINDOWS DO NOT WORK AT ALL 
The power window timer function does not work normally. D-2 INSPECTION PROCEDURE D-2: POWER WINDOWS: THE POWER WINDOW TIMER FUNCTION DOES NOT WORK NORMALLY 
Only the front door window (LH) does not work normally by operating the power window main switch. D-3 INSPECTION PROCEDURE D-3: POWER WINDOWS: ONLY THE FRONT DOOR WINDOW (LH) DOES NOT WORK NORMALLY BY OPERATING THE POWER WINDOW MAIN SWITCH 
Power windows do not work normally by operating the front and rear power window sub switches. D-4 INSPECTION PROCEDURE D-4: POWER WINDOWS: POWER WINDOWS DO NOT WORK NORMALLY BY OPERATING THE FRONT AND REAR POWER WINDOW SUB SWITCHES 
Front or rear passenger's power windows do not work at all by operating the power window main switch. D-5 INSPECTION PROCEDURE D-5: POWER WINDOWS: FRONT PASSENGER'S OR REAR POWER WINDOWS DO NOT WORK AT AIL BY OPERATING THE POWER WINDOW MAIN SWITCH 
Keyless entry system General description concerning keyless entry system. --- GENERAL DESCRIPTION CONCERNING KEYLESS ENTRY SYSTEM 
Keyless entry system does not operate. E-1 INSPECTION PROCEDURE E-1: KEYLESS ENTRY SYSTEM: KEYLESS ENTRY SYSTEM DOES NOT OPERATE 
The front dome light, the rear dome light < vehicles without sunroof>, the turn-signal lights and the horn do not operate through the answerback function. E-2 INSPECTION PROCEDURE E-2: KEYLESS ENTRY SYSTEM: THE FRONT DOME LIGHT, THE REAR DOME LIGHT < VEHICLES WITHOUT SUNROOF>, THE TURN-SIGNAL LIGHTS AND THE HORN DO NOT OPERATE THROUGH THE ANSWERBACK FUNCTION 
Encrypted code cannot be registered. E-3 INSPECTION PROCEDURE E-3: KEYLESS ENTRY SYSTEM: ENCRYPTED CODE CANNOT BE REGISTERED 
FUNCTION SYSTEM CHART

SYSTEM SYMPTOM INSPECTION PROCEDURE REFERENCE
Sunroof < GSR> General description concerning the sunroof. - GENERAL DESCRIPTION CONCERNING THE SUNROOF 
Sunroof does not operate. F-1 INSPECTION PROCEDURE F-1: SUNROOF: SUNROOF DOES NOT OPERATE 
Any of the sunroof switch positions is defective. F-2 INSPECTION PROCEDURE F-2: SUNROOF: ANY OF THE SUNROOF SWITCH POSITIONS IS DEFECTIVE 
Sunroof timer function does not work normally. F-3 INSPECTION PROCEDURE F-3: SUNROOF: SUNROOF TIMER FUNCTION DOES NOT WORK NORMALLY 
Safety mechanism does not function. F-4 INSPECTION PROCEDURE F-4: SUNROOF: SAFETY MECHANISM DOES NOT FUNCTION 
Windshield wiper and washer General description concerning the windshield wiper and washer. --- GENERAL DESCRIPTION CONCERNING THE WINDSHIELD WIPER AND WASHER 
The windshield wipers do not work at all. G-1 INSPECTION PROCEDURE G-1: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD WIPERS DOES NOT WORK AT ALL 
The windshield wipers do not work when the windshield wiper switch is at "INT" or "MIST" position or the windshield washer switch is at "ON" position. However, the wipers work at low speed when the windshield wiper switch is at "LO"or"HI." G-2 INSPECTION PROCEDURE G-2: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD WIPERS DO NOT WORK WHEN THE WINDSHIELD WIPER SWITCH IS AT "INT" OR "MIST" POSITION OR THE WINDSHIELD WASHER SWITCH IS AT "ON" POSITION. HOWEVER, THE WIPERS WORK AT LOW SPEED WHEN THE WINDSHIELD WIPER SWITCH IS AT "LO" OR "HI" 
Any of the windshield wiper switch positions is defective. G-3 INSPECTION PROCEDURE G-3: WINDSHIELD WIPER AND WASHER: ANY OF THE WINDSHIELD WIPER SWITCH POSITIONS IS DEFECTIVE 
The windshield wipers do not stop at the predetermined park position. G-4 INSPECTION PROCEDURE G-4: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD WIPERS DOES NOT STOP AT THE PREDETERMINED PARK POSITION 
The windshield intermittent wiper interval is not changed by operating the windshield intermittent wiper interval adjusting knob. G-5 INSPECTION PROCEDURE G-5: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD INTERMITTENT WIPER INTERVAL IS NOT CHANGED BY OPERATING THE WINDSHIELD INTERMITTENT WIPER INTERVAL ADJUSTING KNOB 
The windshield intermittent wiper interval is not changed according to the vehicle speed. G-6 INSPECTION PROCEDURE G-6: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD INTERMITTENT WIPER INTERVAL IS NOT CHANGED ACCORDING TO THE VEHICLE SPEED 
The windshield washer does not work. G-7 INSPECTION PROCEDURE G-7: WINDSHIELD WIPER AND WASHER: WINDSHIELD WASHER DOES NOT WORK 
Rear wiper and washer < GSR> General description concerning the rear wiper and washer. --- GENERAL DESCRIPTION CONCERNING THE REAR WIPER AND WASHER 
Rear wiper does not work at all. H-1 INSPECTION PROCEDURE H-1: REAR WIPER AND WASHER: REAR WIPER DOES NOT WORK AT ALL 
Rear wiper does not stop at the predetermined park position. H-2 INSPECTION PROCEDURE H-2: REAR WIPER AND WASHER: REAR WIPER DOES NOT STOP AT THE PREDETERMINED PARK POSITION 
When the sift lever is moved to "R" position during the rear wiper operation, the rear wiper does not operate at the continuous mode. H-3 INSPECTION PROCEDURE H-3: REAR WIPER AND WASHER: WHEN THE SHIFT LEVER IS MOVED TO REVERSE "R" POSITION DURING THE REAR WIPER OPERATION, THE REAR WIPER DOES NOT OPERATE AT THE CONTINUOUS MODE 
Rear washer does not work. H-4 INSPECTION PROCEDURE H-4: REAR WIPER AND WASHER: REAR WASHER DOES NOT OPERATE 
Seat belt warning light General description concerning the seat belt warning light. --- GENERAL DESCRIPTION CONCERNING THE SEAT BELT WARNING LIGHT 
The seat belt warning light does not work normally. I-1 INSPECTION PROCEDURE I-1: SEAT BELT WARNING LIGHT: THE SEAT BELT WARNING LIGHT DOES NOT WORK NORMALLY 
FUNCTION SYSTEM CHART

SYSTEM SYMPTOM INSPECTION PROCEDURE REFERENCE
Headlight and taillight General description concerning headlight and taillight. --- GENERAL DESCRIPTION CONCERNING THE HEADLIGHT AND TAILLIGHT 
The taillights do not illuminate normally. J-1 INSPECTION PROCEDURE J-1: HEADLIGHT AND TAILLIGHT: THE TAILLIGHTS DO NOT ILLUMINATE NORMALLY 
Headlights (low-beam) do not illuminate normally. J-2 INSPECTION PROCEDURE J-2: HEADLIGHT AND TAILLIGHT: HEADLIGHTS (LOW-BEAM) DO NOT ILLUMINATE NORMALLY 
Headlights (high-beam) do not illuminate normally. J-3 INSPECTION PROCEDURE J-3: HEADLIGHT AND TAILLIGHT: HEADLIGHTS (HIGH-BEAM) DO NOT ILLUMINATE NORMALLY 
When the passing switch is turned "ON", the headlights (low-beam or high-beam) do not illuminate. J-4 INSPECTION PROCEDURE J-4: HEADLIGHT AND TAILLIGHT: WHEN THE PASSING SWITCH IS TURNED "ON", THE HEADLIGHTS (LOW-BEAM OR HIGH-BEAM) DO NOT ILLUMINATE 
Headlights do not illuminate when the lighting switch is at "AUTO," "TAIL," and "PASSING" position, but illuminate at low-beam when the switch is at "HEAD" position, at this position, the headlights cannot be changed into high-beam by operating the dimmer switch. J-5 INSPECTION PROCEDURE J-5: HEADLIGHT AND TAILLIGHT: HEADLIGHTS DO NOT ILLUMINATE WHEN THE LIGHTING SWITCH IS AT "AUTO," "TAIL," AND "PASSING" POSITION, BUT ILLUMINATE AT LOW-BEAM WHEN THE SWITCH IS AT "HEAD" POSITION, AT THIS POSITION, THE HEADLIGHTS CANNOT BE CHANGED INTO HIGH-BEAM BY OPERATING THE DIMMER SWITCH 
Any of the taillights, the position lights or the license plate lights do not illuminate. J-6 INSPECTION PROCEDURE J-6: HEADLIGHT AND TAILLIGHT: ANY OF THE TAILLIGHTS, THE POSITION LIGHTS OR THE LICENSE PLATE LIGHTS DO NOT ILLUMINATE 
One of the headlights does not illuminate. J-7 INSPECTION PROCEDURE J-7: HEADLIGHT AND TAILLIGHT: ONE OF THE HEADLIGHTS DOES NOT ILLUMINATE 
Headlight automatic shutdown function does not work normally. J-8 INSPECTION PROCEDURE J-8: HEADLIGHT AND TAILLIGHT: HEADLIGHT AUTOMATIC SHUTDOWN FUNCTION DOES NOT WORK NORMALLY 
Headlight dimmer switch automatic resetting function does not work normally. J-9 INSPECTION PROCEDURE J-9: HEADLIGHT AND TAILLIGHT: HEADLIGHT DIMMER SWITCH AUTOMATIC RESETTING FUNCTION DOES NOT WORK NORMALLY 
Flasher timer General description concerning the flasher timer. - GENERAL DESCRIPTION CONCERNING THE FLASHER TIMER 
Turn-signal lights do not flash when the turn-signal light switch is turned on. K-1 INSPECTION PROCEDURE K-1: FLASHER TIMER: TURN-SIGNAL LIGHTS DO NOT FLASH WHEN THE TURN-SIGNAL LIGHT SWITCH IS TURNED ON 
Hazard warning lights do not flash when the hazard warning light switch is turned on. K-2 INSPECTION PROCEDURE K-2: FLASHER TIMER: HAZARD WARNING LIGHTS DO NOT FLASH WHEN THE HAZARD WARNING LIGHT SWITCH IS TURNED ON 
The right or left turn-signal light does not illuminate. K-3 INSPECTION PROCEDURE K 3: FLASHER TIMER: THE RIGHT OR LEFT TURN-SIGNAL LIGHT DOES NOT ILLUMINATE 
Fog light General description concerning the fog light. - GENERAL DESCRIPTION CONCERNING FOG LIGHT 
The fog lights do not illuminate when the fog light switch is turned on. L-1 INSPECTION PROCEDURE L-1: FOG LIGHT: THE FOG LIGHTS DO NOT ILLUMINATE WHEN THE FOG LIGHT SWITCH IS TURNED ON 
The fog lights does not go out when the headlight switch is turned off. L-2 INSPECTION PROCEDURE L-2: FOG LIGHT: THE FOG LIGHTS DO NOT GO OUT WHEN THE HEADLIGHTS (LOW-BEAM) ARE TURNED OFF WHILE THE FOG LIGHTS ARE ON 
One of the fog lights does not illuminate. L-3 INSPECTION PROCEDURE L-3: FOG LIGHT: ONE OF THE FOG LIGHTS DOES NOT ILLUMINATE 
FUNCTION SYSTEM CHART

SYSTEM SYMPTOM INSPECTION PROCEDURE REFERENCE
Interior light General description concerning the interior light. - GENERAL DESCRIPTION CONCERNING THE INTERIOR LIGHT 
The front dome light, rear dome light < vehicles without sunroof> and luggage compartment light do not illuminate or go out normally. M-1 INSPECTION PROCEDURE M-1: INTERIOR LIGHT: THE FRONT DOME LIGHT, THE REAR DOME LIGHT < VEHICLES WITHOUT SUNROOF> AND THE LUGGAGE COMPARTMENT LIGHT DO NOT ILLUMINATE OR GO OUT NORMALLY 
The front dome light, rear dome light < vehicles without sunroof> or luggage compartment light does not illuminate or go out normally. M-2 INSPECTION PROCEDURE M-2: INTERIOR LIGHT: THE FRONT DOME LIGHT, THE REAR DOME LIGHT < VEHICLES WITHOUT SUN ROOF> OR THE LUGGAGE COMPARTMENT LIGHT DOES NOT ILLUMINATE OR GO OUT NORMALLY 
The front dome light and rear dome light < vehicles without sunroof> dimming function does not work normally. M-3 INSPECTION PROCEDURE M-3: INTERIOR LIGHT: THE FRONT DOME LIGHT AND THE REAR DOME LIGHT < VEHICLES WITHOUT SUNROOF> DIMMING FUNCTION DOES NOT WORK NORMALLY 
The interior light automatic shut-down function does not work normally. M-4 INSPECTION PROCEDURE M-4: INTERIOR LIGHT: THE INTERIOR LIGHT AUTOMATIC SHUT-DOWN FUNCTION DOES NOT WORK NORMALLY. 
The door ajar indicator light does not illuminate normally. M-5 INSPECTION PROCEDURE M-5: INTERIOR LIGHT: THE DOOR AJAR INDICATOR LIGHT DOES NOT ILLUMINATE OR GO OUT NORMALLY 
The ignition key cylinder illumination light does not illuminate or go out normally. M-6 INSPECTION PROCEDURE M-6: INTERIOR LIGHT: THE IGNITION KEY CYLINDER ILLUMINATION LIGHT DOES NOT ILLUMINATE OR GO OUT NORMALLY 
scientia non olet · About LEMON Manuals