System Specifications

Engine Mechanical
Crankshaft damper pulley bolt 125 ± 4 Nm (18 ± 3 ft. lbs.)
Crankshaft pulley center bolt 167 Nm (123 ft. lbs.)
Engine Overhaul
Crankshaft pulley bolt 25 ± 4 Nm (19 ± 2 ft. lbs.)

Install the timing belt tensioner adjuster to the engine and then tighten the mounting bolt to the specified torque. Do not remove the wire or pin until the tension of the valve timing belt is adjusted.
Tightening torque 23 ± 3 Nm (17 ± 2 ft. lbs.)