LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2005 >> Endeavor XLS, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Cruise Control System >> Auto-Cruise Control >> On-Vehicle Service >> Auto-Cruise Control Switch Check >> Auto-Cruise Control Setting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Auto-Cruise Control Setting

  1. Switch "ON" the "CRUISE" (MAIN) switch.
  2. Drive at the desired speed, above approximately 40 km/h (25 mph).
  3. Push the auto-cruise control switch in the direction of arrow.
    Fig 1: Setting Auto-Cruise Control
    G02393417Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. Check to be sure that when the switch is released the speed is the desired constant speed.
NOTE: If the vehicles speed decreases to approximately 15 km/h (9 mph) below the set speed because of climbing a hill for example, the auto-cruise control will be cancelled.
scientia non olet · About LEMON Manuals