LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2005 >> Lancer ES, Standard >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Wheel Hubs >> Front Axle -- Except Evolution >> Front Axle Hub Assembly >> Disassembly And Assembly >> Reassembly Service Points >> >> B << Hub Starting Torque Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> B << Hub Starting Torque Check

  1. Tighten special tools MB991000 (MB990998) and MB991017 to the specified torque, and then press the hub into the knuckle.
  2. Rotate the hub in order to seat the bearing.
    Fig 1: Pressing Hub Into Knuckle
    G02413936Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Measure the hub starting torque by using the special tools MB990326 and MB990685.
    • Limit: 1.8 N.m (16 in-lb) 
  4. The starting torque must be within the limit and, in addition, the hub rotation must be smooth.
    Fig 2: Measuring Hub Starting Torque
    G02413937Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals