LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2005 >> Lancer Evolution MR >> Repair and Diagnosis (Single Page) >> Body & Frame >> Ignition Switch/Steering Lock >> Chassis Electrical -- Evolution >> Headlight, Front Side Marker Light And Position Light Assembly >> Lighting System Diagnosis >> Troubleshooting Strategy >> How To Check Discharge Headlight Components. >> Check The Wiring Harness Between The Controller And The Bulb.
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check The Wiring Harness Between The Controller And The Bulb.

If any of the defects below are found, replace the wiring harness between the controller and the bulb.

CAUTION: If the wiring harness between the controller and the bulb is defective, always replace it. Attempting to repair the wiring harness may cause a melted harness wire.
WIRING HARNESS CHECK

Items to be checked Why the controller should be replaced
Wiring harness shield damaged (breakage) Causing abnormal noise
Damaged connector (chipped or cracked plastics, or deformed terminal) Because the damaged part(s) may cause poor connection
scientia non olet · About LEMON Manuals