LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2005 >> Lancer Evolution MR >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Overhaul -- Evolution) >> Transaxle (Transmission) >> Disassembly And Assembly >> Assembly Service Points >> >> H << Select Lever Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> H << Select Lever Installation

WARNING: This page is about a different variant/trim than selected.
  1. Apply grease (Mitsubishi genuine grease part No. 0101011 or equivalent) to the control shaft sliding portion of the select lever shoe.
  2. Install the select lever and tighten the bolts to specified torque.
    • Tightening torque: 18 +/- 3 N.m (13 +/- 2 ft-lb) 
    Fig 1: Applying Grease To Control Shaft Sliding Portion Of Select Lever Shoe
    G02486372Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals