Fastener Tightening Specifications
Fastener Tightening Specifications
| ITEM | SPECIFICATION |
|---|---|
| Rear wheel hub assembly, drive shaft assembly | |
| Drive shaft nut | 225 ± 25 N.m (166 ± 18 ft-lb) |
| Rear wheel hub assembly mounting bolt | 71 ± 7 N.m (53 ± 5 ft-lb) |
| Brake caliper mounting bolt | 54 ± 5 N.m (40 ± 4 ft-lb) |
| Backing plate mounting nut | 118 ± 19 N.m (87 ± 14 ft-lb) |
| Knuckle | |
| Self locking nut (Trailing arm connection) | 81 ± 6 N.m (60 ± 4 ft-lb) |
| Self locking nut (Lower arm connection) | 88 ± 10 N.m (65 ± 7 ft-lb) |
| Self locking nut (Toe control arm connection) | 81 ± 6 N.m (60 ± 4 ft-lb) |
| Self locking nut (Upper arm connection) | 81 ± 6 N.m (60 ± 4 ft-lb) |
| Differential carrier assembly | |
| Propeller shaft and differential companion flange connecting nut | 32 ± 2 N.m (24 ± 1 ft-lb) |
| Differential mount bracket bolt | 88 ± 10 N.m (65 ± 7 ft-lb) |
| Differential mount bracket to differential support member connecting bolt | 120 ± 10 N.m (89 ± 7 ft-lb) |
| Differential support member mounting bolt | 88 ± 10 N.m (65 ± 7 ft-lb) |
| Differential support arm to differential carrier mounting bolt | 88 ± 10 N.m (65 ± 7 ft-lb) |
| Differential support arm mounting nut | 88 ± 10 N.m (65 ± 7 ft-lb) |
| Rear crossmember mounting bolt (long) | 88 ± 10 N.m (65 ± 7 ft-lb) |
| Rear crossmember mounting bolt (short) | 85 ± 6 N.m (63 ± 4 ft-lb) |
| Toe control bar mounting bolt | 69 ± 9 N.m (51 ± 7 ft-lb) |
| Differential cover bolt | 36 ± 5 N.m (26 ± 4 ft-lb) |
| Drain plug | 64 ± 4 N.m (47 ± 3 ft-lb) |
| Drive gear and limited slip differential case mounting bolt | 84 ± 4 N.m (62 ± 3 ft-lb) |
| Companion flange self-locking nut | 186 ± 29 N.m (137 ± 21 ft-lb) |
| Filler plug | 49 ± 9 N.m (37 ± 6 ft-lb) |
| Bearing cap bolt | 37 ± 2 N.m (27 ± 1 ft-lb) |