LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2005 >> Lancer Evolution >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Power Steering -- Except Evolution) >> Power Steering Gear Box And Linkage >> Disassembly And Assembly >> Assembly Service Points >> << A >> Oil Seal Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

<< A >> Oil Seal Installation

WARNING: This page is about a different variant/trim than selected.
  1. Apply a coating of GENUINE MITSUBISHI POWER STEERING FLUID to the both sides of the oil seal.
  2. Using the following special tools, press the oil seal into the rack housing.
    • MB991197: Bar (long type)
    • MB991199: Oil Seal Installer < Vehicles with 16 inch tire>
    • MB991202: Oil Seal and Bearing Installer < Vehicles with 14 and 15 inch tire>
    Fig 1: Pressing Oil Seal Into Rack Housing
    G02414365Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals