LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2005 >> Lancer Evolution >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Intake And Exhaust -- Except Evolution) >> Intake Manifold >> Inspection >> Intake Manifold Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intake Manifold Check

WARNING: This page is about a different variant/trim than selected.
  1. Check for damage or cracking of any part.
  2. Clogging of the negative pressure (vacuum) outlet port, or clogging of the exhaust gas recirculation passages.
  3. Using a straight edge and feeler gauge, check for distortion of the cylinder head installation surface.

    Standard value: 0.15 mm (0.006 inch) or less Limit: 0.20 mm (0.008 inch) 

scientia non olet · About LEMON Manuals