Service Specifications
WARNING: This page is about a different variant/trim than selected.
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE |
|---|---|
| Output shaft preload mm (in) | 0.01 - 0.09 (0.0004 - 0.0035) |
| Brake reaction plate end play mm (in) | 0-0.16(0-0.0063) |
| Low-reverse brake end play mm (in) < F4A4B-1 > | 1.35-1.81 (0.0531 -0.0713) |
| Low-reverse brake end play mm (in) < F4A4B-4 > | 1.65-2.11 (0.0649-0.0831) |
| Second brake end play mm (in) | 0.79 - 1.25 (0.0311 - 0.0492) |
| Underdrive sun gear end play mm (in) | 0.25-0.45(0.0098-0.0177) |
| Input shaft end play mm (in) | 0.70 - 1.45 (0.028 - 0.057) |
| Differential case preload mm (in) | 0.045 - 0.105 (0.0018 - 0.0041) |
| Underdrive clutch end play mm (in) | 1.6-1.8(0.063-0.070) |
| Reverse and overdrive clutch return spring retainer end play mm (in) | 0 - 0.09 (0 - 0.003) |
| Overdrive clutch end play mm (in) | 1.6-1.8(0.063-0.070) |
| Reverse clutch end play mm (in) | 1.5 - 1.7 (0.060 - 0.066) |
| Backlash between differential side gear and pinion mm (in) | 0.025 - 0.150 (0.0010 - 0.0059) |