Snap ring
WARNING: This page is about a different variant/trim than selected.
(For adjustment of input shaft front bearing end play)
SNAP RING THICKNESS SPECIFICATIONS
| THICKNESS mm (in) | IDENTIFICATION SYMBOL | THICKNESS mm (in) | IDENTIFICATION SYMBOL |
|---|---|---|---|
| 2.24 (0.0882) | None | 2.38 (0.0937) | Brown |
| 2.31 (0.0909) | Blue | - | - |
(For adjustment of input shaft rear bearing end play)
(For adjustment of output shaft front bearing end play)
SNAP RING THICKNESS SPECIFICATIONS
| THICKNESS mm (in) | IDENTIFICATION SYMBOL | THICKNESS mm (in) | IDENTIFICATION SYMBOL |
|---|---|---|---|
| 1.43 (0.0563) | Green (2) | 1.59 (0.0626) | Yellow (2) |
| 1.51 (0.0594) | White (2) | - | - |
(For adjustment of output shaft 3rd speed gear end play)
SNAP RING THICKNESS SPECIFICATIONS
| THICKNESS mm (in) | IDENTIFICATION SYMBOL | THICKNESS mm (in) | IDENTIFICATION SYMBOL |
|---|---|---|---|
| 2.81 (0.1106) | Green | 2.97 (0.1169) | Orange |
| 2.85 (0.1122) | White | 3.01 (0.1185) | Red |
| 2.89 (0.1138) | Yellow | 3.05 (0.1201) | Pink |
| 2.93 (0.1154) | Black | 3.09 (0.1217) | Blue |
(For adjustment of output shaft rear bearing end play)
SNAP RING THICKNESS SPECIFICATIONS
| THICKNESS mm (in) | IDENTIFICATION SYMBOL | THICKNESS mm (in) | IDENTIFICATION SYMBOL |
|---|---|---|---|
| 2.31 (0.0909) | Black (2) | 2.55 (0.1004) | Yellow |
| 2.35 (0.0925) | None | 2.59 (0.1020) | Black |
| 2.39 (0.0941) | Blue | 2.63 (0.1035) | Orange |
| 2.43 (0.0957) | Brown | 2.67 (0.1051) | Blue |
| 2.47 (0.0972) | Green | 2.71 (0.1067) | Brown |
| 2.51 (0.0988) | White | - | - |