Theft Protection

In order to protect against theft, a Vehicle Identification Number (VIN) is attached as a plate or label to the following major parts of the engine and transaxle, as well as main outer panels: Engine cylinder block, Transaxle housing, Fender, Doors, Trunk lid, Quarter panel, Hood, Bumpers

In addition, a theft-protection label is attached to replacement parts for the body outer panel main components, and the same data is stamped into replacement parts for the engine and the transaxle.

1. When repainting original parts, do so after first masking the theft-protection label. After painting, be sure to peel off the masking tape. 
2. The theft-protection label for replacement parts is covered by masking tape, so such parts can be painted as is. The masking tape should be removed after painting is finished. 
3. The theft-protection label should not be removed from original parts or replacement parts. 

Fig 1: Identifying Theft Protection Label

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Identifying Theft Protection Labels Location (1 Of 2)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 3: Identifying Theft Protection Labels Location (2 Of 2)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.