<< B >> Steering Wheel And Airbag Module Assembly Removal

By sliding section A of the clock spring connector as shown in the illustration in the arrow direction, disconnect the connector.

Fig 1: Pulling Clock Spring Connector
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Loosen the bolt completely. Then, remove the steering wheel and airbag module assembly.
NOTE: Use a hexagonal bit socket or a hexagonal wrench having an effective length of 75 mm (3.0 inches) or more in the hexagonal section and the diameter of 8 mm (0.31 inches) or more.

Fig 2: Identifying Special Tools (Hexagonal Bit Socket)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.