Fluid Level Check
- Park the vehicle on a flat, level surface, start the engine, and then turn the steering wheel in both directions several times to raise the temperature of the fluid to approximately 50 - 60°C (122 - 140°F).
- With the engine running, turn the wheel all the way to the left and right several times.
- Check the fluid in the oil reservoir for foaming or milkiness.
- Check the difference of the fluid level when the engine is stopped, and while it is running. If the change of the fluid level is 5 mm (0.2 inch) or more, air bleeding should be done.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.