Torque Specification: Transfer
TORQUE SPECIFICATION
| ITEMS | SPECIFICATIONS |
|---|---|
| 2WD switch | 35 +/- 6 N.m (26 +/- 4 ft-lb) |
| 2-4WD switch | 35 +/- 6 N.m (26 +/- 4 ft-lb) |
| 4H switch | 35 +/- 6 N.m (26 +/- 4 ft-lb) |
| 4LL switch | 35 +/- 6 N.m (26 +/- 4 ft-lb) |
| Center differential lock switch | 35 +/- 6 N.m (26 +/- 4 ft-lb) |
| Control housing to transfer case tightening bolt | 19 +/- 3 N.m (13 +/- 2 ft-lb) |
| Output sensor mounting bolt | 11 +/- 1 N.m (97 +/- 9 in-lb) |
| Rear cover to chain cover tightening bolt | 35 +/- 6 N.m (26 +/- 4 ft-lb) |
| Sift actuator mounting bolt | 22 +/- 4 N.m (16 +/- 3 ft-lb) |
| Speedometer sensor mounting bolt | 11 +/- 1 N.m (97 +/- 9 in-lb) |
| Transfer case plate to bearing retainer mounting bolt | 20 +/- 2 N.m (14 +/- 1 ft-lb) |
| Transfer case plate to transfer case tightening bolt and nut | 35 +/- 6 N.m (26 +/- 4 ft-lb) |
| Transfer case to bearing retainer mounting bolt | 20 +/- 2 N.m (14 +/- 1 ft-lb) |
| Transfer case to chain cover tightening bolt | 35 +/- 6 N.m (26 +/- 4 ft-lb) |