Programming and Relearning

HOW TO INITIALIZE A/T LEARNING VALUE
A/T learned value must be reset whenever the automatic transaxle, engine assembly, A/T valve body, or
A/T solenoid valve is replaced. It cannot be reset by disconnecting the battery. Use the MUT-III as follows:

1. Shift the selector lever to P and turn the ignition key to the LOCK (OFF) position.
2. Connect the MUT-III to the vehicle's data link connector.
3. In the ELC-A/T menu screen, select "Special Function", then select "Memory Reset."
4. Select "OK" to reset the A/T learned value memory.
5. After this initialization, make the system learn the idling in accordance with "Learning procedure for idling in MPI engine".

NOTE: This reset procedure will also automatically initialize the INVECS-II Learned Value. A/T DTCs and A/T freeze frame data will be erased. (Engine DTCs, engine-related freeze-frame data, and Readiness status will remain even after A/T Learned Value is reset.)