LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2005 >> Outlander LS, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Traction Control/Active Skid Control System) >> Steering Wheel Sensor >> Removal And Installation >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Notes

WARNING: This page is about a different car, the 2005 Mitsubishi Endeavor. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Before removing the steering wheel and air bag module assembly, refer to SERVICE PRECAUTIONS and AIR BAG MODULE AND CLOCK SPRING .
CAUTION: Always carry out steering wheel sensor calibration after the steering wheel sensor has been installed (Refer to STEERING WHEEL SENSOR CALIBRATION ). This is necessary because the TCL/ASC-ECU should update the steering neutral point.
Fig 1: Removing Steering Wheel Sensor
G02366365Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.