INSPECTION PROCEDURE 11: TCL/ASC System Does Not Operate.: Diagnosis

WARNING: This page is about a different car, the 2005 Mitsubishi Endeavor. However, it is still accessible from the selected car via links, so may be relevant.

Required Special Tools:

MB991958: Scan Tool (MUT-III Sub Assembly)
- MB991824: Vehicle Communication Interface (V.C.I.)
- MB991827: MUT-III USB Cable
- MB991910: MUT-III Main Harness A

STEP 1. Perform Hydraulic Unit check.
Refer to HYDRAULIC UNIT CHECK .

Q: Is the hydraulic unit normal?
1. YES : Go to Step 2.
2. NO : Connect the brake pipes correctly, repair the external brake lines, or replace the hydraulic unit.
STEP 2. Verify that the condition described by the customer exists.
Q: Can any faults be found with the brake operation?
1. YES : Check the brake system related components except the ASC system.
2. NO : The procedure is complete.