LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2005 >> Outlander XLS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Traction Control System (TCL)) >> On-Vehicle Service >> TCL Indicator Light Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

TCL Indicator Light Check

WARNING: This page is about a different car, the 2005 Mitsubishi Endeavor. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that the "TCL OFF" indicator light and the TCL work indicator light illuminate for three seconds when the ignition switch is turned to the "ON" position.
  2. Check that the "TCL OFF" indicator light illuminates and goes off in cycles each time the TCL switch is pushed after starting the engine.
    Fig 1: Identifying TCL Work Indicator Light
    G02389954Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Check that the "TCL OFF" indicator light and the TCL work indicator light do not illuminate, when driving at 30km/h (37.5 mph) for more than 2 seconds.
    Fig 2: Identifying TCL Switch
    G02389955Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. If defective, repair it. (Refer to TCL DIAGNOSIS - SYMPTOM PROCEDURES - INSPECTION PROCEDURE 1, 2, 3 AND 4 ).